| |
Accessories are divided into Catagories for easier viewing. Please click appropriate Tab to view each catagory.
- Carts
- Aerators
- Lawn Sweepers and Rollers
- Spreaders/Sprayers
Carts
| All Terrain UV / ATV Poly Cart |
| Part Number: |
LPPCT-LXATVJD |

Shown with optional Hard Cover |
| Price: |
$749.10 |
| |
| 10P Poly Cart |
| Part Number: |
LPPCT-10JD |
 |
| Price: |
$426.80 |
| |
| 13 Steel Utility Cart |
| Part Number: |
LPHDC-13JD |
 |
| Price: |
$543.40 |
| |
| 18 Steel Utility Cart |
| Part Number: |
LPHDC-18JD |
 |
| Price: |
$701.80 |
| |
| 21 Steel Utility Cart |
| Part Number: |
LPUT-21JD |
 |
| Price: |
$1,346.40 |
| |
| 2 cu. Tractor Trunk |
| Part Number: |
BM20874 |
 |
| Price: |
$290.40 |
Click Here for Details and Information
Features/benefits include:
Two cu. ft. polyethylene box.
- Convenient size for hauling a variety of materials and a low-cost rear ballast.
- Box material is durable, easy to clean, and will not rust.
Quick-release spring lever.
- Box locks in place automatically.
- Material can be dumped from tractor seat.
Quik-Tatch rear mounting.
- Quick installation or removal.
- No tools required to install or remove.
- Tractor maneuverability is not compromised.
Notes:
1) Installation of BM19210 2 cu. ft. Tractor Trunk on STX, LX277AWS, LX280, LX280 AWS, LX289, GT, GX and 325-
355D requires an additional mounting parts kit, BM19211.
2) Installation of BM20676 2 cu. ft. Tractor Trunk on the SST15, SST16 and SST18 requires BM20937 front weight kit for
ballast.
Requirements and/or recommendations:
1) TO MAINTAIN STABILITY: For front-end ballast, ALL tractors require that ONE of the following be installed when
using the tractor trunk:
• Mid-mount mower OR
• Front attachment OR
• Two suitcase weights or two front wheel weights
• SST’s require BM20752 front weight kit and mid-mount mower
2) See “Non-Current and Current Equipment Cross Reference” section for requirements for specific bundle numbers.
USING THE TRACTOR TRUNK FOR REAR TRACTION BALLAST
IMPORTANT:Although the tractor trunk is ideal for carrying rear-end ballast to improve the tractor’s traction when blading
or blowing snow, carrying loads in excess of the following recommendations will likely cause damage to the
>
tractor’s transmission. Tractor wheel slippage aids in preventing damage to the transmission—the heavier the
ballast load the less the tractor wheels slip and consequently transmission failures could result.
IMPORTANT:
DO NOT use REAR WHEEL WEIGHTS in addition to the maximum weight shown in the chart below.
STX and LT Lawn Tractors:
Gear transmission . . . . . . . . . . . . . . . . . . . . . . . 23 kg (50 lb.) maximum
Hydrostatic transmission . . . . . . . . . . . . . . . . . . 36 kg (80 lb.) maximum
LX Lawn Tractors:
Gear transmission . . . . . . . . . . . . . . . . . . . . . . . 45 kg (100 lb.) maximum
Hydrostatic transmission . . . . . . . . . . . . . . . . . . 45 kg (100 lb.) maximum
SST Lawn Tractors . . . . . . . . . . . . . . . . . . . . . . . . 45 kg (100 lb.) maximum
GT, GX, 300 Series Garden Tractors:
Gear transmission . . . . . . . . . . . . . . . . . . . . . . . 68 kg (150 lb.) maximum
Hydrostatic transmission . . . . . . . . . . . . . . . . . . 68 kg (150 lb.) maximum
|
| 3 cu. Tractor Trunk |
| Part Number: |
BM20874 |
 |
| Price: |
$290.40 |
Click Here for Details and Information
Features include:
Three cu. ft. polyethylene box.
- For hauling up to 300 lb. of material
- Convenient size for hauling a variety of materials and a low-cost rear ballast
- Box material is durable, easy to clean, and will not rust
Quick-release spring lever.
- Box locks in place automatically
- Material can be dumped from tractor seat
Quik-Tatch rear mounting.
- Quick installation or removal
- No tools required to install or remove
- Tractor maneuverability is not compromised
Also provides a low-cost way to add rear ballast to these tractors:
- X700, X720, X724, X728, X740, X744, X748 Ultimate Tractors
- X465, X475, X485, and X495 Two-Wheel Steer and All-Wheel Steer Tractors
- X575, X585, and X595 Four-Wheel Drive Tractors
- 425, 445, and 455 Two-Wheel Steer and All-Wheel Steer Tractors
Requirements and Recommendations
BM20874 3 cu. ft. Tractor Trunk is compatible with:
-
-
X400/X500 Heavy Duty Garden Tractors
-
Mounting bundles or parts are required as follows:
X700, X720, X724, X728, X740, X744, X748, X465, X475, X485, X495, X575, X585, and X595 require BM20714 Click-N-Go System or (2) AM127399 Support Link, (2) M131215 Attaching Plate, and (2) A15147 Spring Pins. For tractors with 3-point hitch installed, the turnbuckle and lower arms must be removed with either mounting system.
425, 445, 455 Two-Wheel Steer and All-Wheel Steer Tractors require BM20714 Click-N-Go System or (2) AM127399 Support Link, (2) M131215 Attaching Plate, and (2) A15147 Spring Pins. For tractors with 3-point hitch installed, the turnbuckle and lower arms must be removed with either mounting system.
TO MAINTAIN STABILITY:
For front-end ballast, ALL tractors require that ONE of the following be installed when using the tractor trunk:
- Mid-mount mower OR
- Front attachment OR
- Two suitcase weights or two front wheel weights
USING THE TRACTOR TRUNK FOR REAR TRACTION BALLAST:
IMPORTANT: Although the tractor trunk is ideal for carrying rear-end ballast to improve the tractor's traction when blading or blowing snow, carrying loads in excess of the following recommendations will likely cause damage to the tractor's transmission.
Tractor wheel slippage aids in preventing damage to the transmission; the heavier the ballast load the less the tractor wheels slip and consequently transmission failures could result.
IMPORTANT: DO NOT use REAR WHEEL WEIGHTS in addition to the maximum weight shown below.
X700 Ultimate Series, X400/X500 HDGT, and 425, 445, and 455 Garden Tractors: |
Hydrostatic transmission |
68 kg (300 lb.) maximum |
| Specifications |
| Capacity |
3 cu. ft. |
| Hopper material |
High-density polyethylene |
| Dump latch |
Spring-loaded |
| Overall depth |
12-in. (30.5cm) |
| Overall width |
46.5-in. (118cm) |
| Overall length |
16-in. (40.6cm) |
|
Also available:
Aerators
| 40-Inch Tow Behind Spiker Aerator |
| Part Number: |
LPSAT-40JD |
 |
| Price: |
Around $550 + Assembly |
Click Here for Details and Information
40 Inch Spike Aerator
The Spiker Aerator penetrates soil, allowing air, water, and nutrients to enter the lawn. It also relieves soil compaction.
- 1016mm (40") width with up to 51mm (2") penetration
- 10-in. diameter steel tine stars
- 132 steel tine tips on 11 203mm (8") spike wheels
- 3-1/2-in. spike wheel spacing
- Full-size lift lever
- 4.10/3.5 - 4 pneumatic tires for easy pulling
- 45kg (100-lb). capacity weight tray
Requirements and Recommendations
1) Rear wheel weights are recommended for additional traction.
2) The 48-in. Tow-Behind Plug Aerator is not recommended for Select Series X300s, LA100, 100, or L100 Series, 100 Series, LT, LTR, or LX Lawn Tractors
Quality Design
- The John Deere tow-behind lawn care tools are compatible with all John Deere Lawn and Garden Tractors, as well as competitive tractors
- This implement features legendary John Deere performance and quality
| Specifications |
| Width |
40-in. (101.6 cm) |
| Aerator Depth |
Up to 2-in. (5.1 cm) |
| Tines: |
|
| Number of tips |
132 |
| Diameter |
10-in. (25.4 cm) |
| Spacing |
3.5-in. (8.9 cm) apart |
| Material |
Steel |
| Lift Adjuster |
Manual |
| Wheels |
4.10/3.5-4, pneumatic |
| Weight-Tray Capacity |
175 lb. (79.4 kg) |
1.5 Hours assembly required |
| 40-Inch Tow Behind Plug Aerator |
| Part Number: |
LPPA-40JD |
 |
| Price: |
Around $750 + Assembly |
Click Here for Details and Information
40-in. Tow-Behind Plug Aerator
The Plug Aerator removes plugs of soil up to 3-in. deep to allow penetration of air, water, and nutrients. It also helps relieve soil compaction.
- 40-in. width with up to 3-in. penetration
- 3-position lift handle for 2- or 3-in. plug lengths
- 28 carbonized, 16-gauge steel, individually serviceable plugging tines
- 1-in. diameter high-carbon steel tine shaft
- 4.10/3.50-4 pneumatic tires for easy pulling
- 175-lb. capacity weight tray
Requirements and Recommendations
1) Rear wheel weights are recommended for additional traction.
2) The 48-in. Tow-Behind Plug Aerator is not recommended for Select Series X300s, LA100, 100, or L100 Series, 100 Series, LT, LTR, or LX Lawn Tractors.
Quality Design
-
The John Deere tow-behind lawn care tools are compatible with all John Deere Lawn and Garden Tractors, as well as competitive tractors
-
This implement features legendary John Deere performance and quality
| Specifications |
| Width |
40-in. (101.6 cm) |
| Aerator Depth |
Up to 3-in. (7.6 cm) |
| Tines: |
|
| Number of tips |
28 |
| Spacing |
6-in. (15.2 cm) apart |
| Material |
Carbonized, 16-ga. steel |
| Lift Adjuster |
Manual, 3-position |
| Wheels |
4.10/3.5-4, pneumatic |
| Weight-Tray Capacity |
175 lb. (79.4 kg) |
1.5 Hours assembly required |
| 40-Inch Aerator/Spreader |
| Part Number: |
LPAS-40JD |
 |
| Price: |
Around $750 + Assembly |
Click Here for Details and Information
40 Inch Aerator Spreader
The Aerator/Spreader can do two jobs at once. It perforates the soil while the calibrated drop-spreader follows with seed, lime, or fertilizer. It can also be used to just aerate the lawn.
- 1016mm (40") width, with up to 51mm (2") penetration
- 132 steel tine tips on 8-in. diameter tine stars
- 3-position, full-size lift lever
- Direct spreader drive for consistent performance
- Adjustable flow control
- 50L spreader capacity
- 4.10/3.5 - 4 pneumatic tires for easy pulling
- 45kg (100lb). capacity weight tray
Requirements and Recommendations
1) Rear wheel weights are recommended for additional traction. 2) The 48-in. Tow-Behind Plug Aerator is not recommended for Select Series X300s, LA100, 100, or L100 Series, 100 Series, LT, LTR, or LX Lawn Tractors.
Quality Design
-
The John Deere tow-behind lawn care tools are compatible with all John Deere Lawn and Garden Tractors, as well as competitive tractors
-
This implement features legendary John Deere performance and quality
| Specifications |
| Width |
40-in. (101.6 cm) |
| Aerator Depth |
Up to 2-in. (5.1 cm), 2 pos. |
| Spreader Capacity |
100 lb. (45kg) |
| Tines |
|
| Number of Tips |
132 |
| Diameter |
8-in. (20.3 cm) |
| Material |
Steel |
| Lift Adjuster |
Manual |
| Wheels |
4.10/3.5-4, pneumatic |
| Drive |
Direct |
| Weight-Tray Capacity |
100 lb. (45 kg) |
1.5 Hours assembly required |
| 48-Inch Tow Behind Plug Aerator |
| Part Number: |
LPPA-48JD |
 |
| Price: |
Around $1000 + Assembly |
Click Here for Details and Information
48-in. Tow-Behind Plug Aerator
The 48-in. Plug Aerator removes plugs of soil up to 3-in. deep to allow penetration of air, water, and nutrients. It also helps relieve soil compaction.
- 48-in. width for excellent productivity
- Heavy-duty construction for high hour use
- 3-position lift lever
- Adjusts for 2- or 3-in. of penetration
- 48 carbonized-steel plugging tines in 12 rows spaced 4-in. apart
- 250 lb. capacity weight tray
- 1-in. diameter steel tine shaft
- Nyliner tine shaft bearings
- 4.10X3.5-4 pneumatic tires
Requirements and Recommendations
1) Rear wheel weights are recommended for additional traction.
2) The 48-in. Tow-Behind Plug Aerator is not recommended for Select Series X300s, 100 or L100 Series, 100 Series, LT, LTR, or LX Lawn Tractors.
| Specifications |
| Width |
48-in. (121.9 cm) |
| Aerator Depth |
Up to 3-in. (7.6 cm) |
| Tines: |
|
| Number of tips |
48 |
| Spacing |
4-in. (10.2 cm) apart |
| Material |
Carbonized, 16-ga. steel |
| Lift Adjuster |
Manual, 3-position |
| Wheels |
4.10/3.5-4, pneumatic |
| Weight-Tray Capacity |
250 lb. (113.6 kg) * |
1.5 Hours assembly required |
| 40-Inch Tow Behind Thatcherator |
| Part Number: |
LPTA-40JD |
 |
| Price: |
Around $400 + Assembly |
Click Here for Details and Information
40-in. Tow-Behind Thatcherator
The Thatcherator can be used as a dethatcher or an aerator. It can also be used to prepare an area for new seed.
- 40-in. width to cover ground fast
- Twenty spring-loaded tines for maximum performance
- 3-position adjustment
- Weight tray that allows for increased scratching power
- An 8-in. extension is available to provide widths of 48- and 56-in. (Add an extension to one end of Thatcherator to make it 48-in. wide, and an extension to both ends for a 56-in. width.) Contact us for a Price.
Requirements and Recommendations
1) Rear wheel weights are recommended for additional traction.
2) The 48-in. Tow-Behind Plug Aerator is not recommended for Select Series X300s, LA100, 100, or L100 Series, 100 Series, LT, LTR, or LX Lawn Tractors.
Quality Design
-
The John Deere tow-behind lawn care tools are compatible with all John Deere Lawn and Garden Tractors, as well as competitive tractors
-
This implement features legendary John Deere performance and quality
| Specifications |
| Width |
40-in. (101.6 cm) |
| Tines: |
|
| Number |
20, spring-loaded tips |
| Diameter |
3/16-in. (.5 cm) |
| Material |
Steel |
| Lift Adjuster |
3-position |
| Wheel: |
|
| Size |
8-in. (20.3 cm) |
| Tread |
Rib |
| Material |
Steel |
| Optional Extension |
8-in. (20.3 cm) |
1.5 Hours assembly required |
Lawn Sweeper/Rollers
| 42-Inch Tow Behind Sweeper |
| Part Number: |
LPSTS-42JD |
 |
| Price: |
Around $700.00 + Assembly |
Click Here for Details and Information
42-in. Tow-Behind Sweeper
The 42-in. Lawn Sweeper offers great performance and hauls an incredible 17 bu. of material. Its design gives superior brush-to-ground contact to prevent skipping and provide maximum performance for a clean path the first time through.
Features
The 42-in. Lawn Sweeper offers great performance and hauls an incredible 17 bu. of material. Its design gives superior brush-to-ground contact to prevent skipping and provide maximum performance for a clean path the first time through.
-
42-in. clearing width
-
17 bu. capacity to make fast work of picking up material
-
Convenient brush-height adjuster has eight positions for easy selection of the optimum sweeping height
-
Hitch has seven positions to match up correctly with a variety of vehicles
-
Large 12-in. x 3-in. wheels with bar tread have good gripping action to ensure positive brush rotation
-
A unique storage feature allows the sweeper to collapse and be stored vertically to minimize storage space
|
| 36-Inch Tow Lawn Roller |
| Part Number: |
LPPRT-36SJD |
 |
| Price: |
Around $450.00 |
Click Here for Details and Information
46-in. Tow Behind Lawn Roller
The Lawn Roller packs down new sod, seed, and mole ridges. Its tough polyethylene drum will not dent or rust. The drum's rounded ends will not gouge the lawn or make ruts.
- 36-in. wide polyethylene drum
- 390-lb. weight for excellent leveling
- Rounded end caps reduce gouging
- 42 U.S. gallon (159 Liter) capacity
- Long-lasting Nylatron bearings
- Requirements and Recommendations
1) Rear wheel weights are recommended for additional traction.
- 2) The 48-in. Tow-Behind Plug Aerator is not recommended for Select Series X300s, LA100, 100, or L100 Series, 100 Series, LT, LTR, or LX Lawn Tractors.
Quality Design
-
The John Deere tow-behind lawn care tools are compatible with all John Deere Lawn and Garden Tractors, as well as competitive tractors
-
This implement features legendary John Deere performance and quality
| Specifications |
| Width |
36-in. (91.4 cm) |
| Roller: |
|
| Size |
18-in. x 36-in. (45.7 cm x 91.4 cm) |
| Capacity |
42 U.S. gal. (159 L) |
| Weight (filled) |
390 lb. (176.4 kg) |
| Drum/End-Cap Material |
Heavy-density polyethylene |
| Bearings |
Nylatron |
|
Spreaders and Sprayers
| 3.5 Cubic Ft Broadcast Spreader |
| Part Number: |
LPBST-35JD |
 |
| Price: |
Around $550.00 + Assembly |
| |
| CargO Mount Electric Spreader |
| Part Number: |
LPBSE-20CMJD |
 |
| Price: |
Around $550.00 |
Click Here for Details and Information
CargO Mount Electric Spreader
Fits 100 Series Tractors. 100 lb., 2 cu. ft. capacity; even spread with all material - independent of tractor speed and conditions.
-
Heavy-duty hopper - won't dent or rust; stainless steel interior hardware and
shaft prevent corrosion
-
12V electric motor with easy-to-reach on/off switch; tested for 2,000 hour life
-
Easily connects to battery with included wiring harness and fuse
-
Environmental protection covers for motor and wiring harness
-
Factory calibrated setting to assure accuracy
 |
Heavy Duty Hopper
The heavy-duty hopper has a 100 lb., 2 cu. ft. capacity and maintains even spreading with all materials - independent of tractor speed and conditions.
- Will not dent or rust
- Stainless steel interior hardware and shaft prevent corrosion
|
 |
Material Flow Control
The flow control assembly operates the flow control plate. The flow control assembly is marked 0 (closed) to 10 (fully open). The position selected determines the amount of material to be broadcast. The higher the number, the heavier the application of material.
After determining the correct setting number for the material, move flow control lock to that position. Move the flow control handle to the lock position to open the flow control plate. |
|
| 15 gal Sprayer |
| Part Number: |
LP19478 |
 |
| Price: |
Around $750.00 |
Click Here for Details and Information
15 gal. Tow-Behind Sprayer
Comes complete with a boom that sprays 60-in. wide. Also has an 12-ft. hose with an adjustable handgun for spot spraying lawns, shrubs, etc.
-
It is an excellent choice for spraying small- to moderate-size lawns and shrubs
-
Handgun with adjustable spray pattern is helpful when spraying fruit trees and can be used to spray trees up to 30-ft. high
-
A 14-in. wand on the handgun is standard equipment to give added convenience when spraying trees
 |
The 15 Gallon Tow-Behind Sprayer has two spray nozzles located on the boom. The 25 and 40 Gallon Trail-Type Sprayers have three spray nozzles located on the boom for broadcast spraying. The 40 Gallon 3-Point-Hitch-Mounted Sprayer has five nozzles. |
 |
On 25 and 40 Gallon Sprayers, the spray boom folds up against the tank for storage. |
 |
Screens in nozzles filter out foreign material.
-
Prevent spray tip from clogging
-
Check valve in spray tip prevents dripping and cross-siphoning of spray material when sprayer is shut off
-
Gives exact spray coverage
|
This liquid sprayer is especially suited for maintaining residential and small commercial properties.
-
Provide an excellent way to apply liquid fertilizer
-
Herbicides and pesticides can be applied along with liquid fertilizer or separately
Advantages of using liquid fertilizer over dry fertilizer.
-
More readily available to plants
-
Need not be worked into the soil by watering or rain before it will work
-
Herbicides are more effective when applied with liquid fertilizer.
 |
Stainless Steel Strainer
The stainless-steel strainer is installed on the end of the pickup hose and rests in the sump at the bottom of the tank. The large tank filler opening allows easy access to the suction hose for cleaning the 50-mesh strainer screen.
Also a unique sump (often not found on competitive units) is provided at the bottom of the tank below the pickup tube. It allows the tank to empty completely.
|
 |
Remote Spraying Jobs
All sprayers feature a handgun made of non-corrosive polypropylene material with Viton components for remote spray jobs.
-
Sprays up to 30-ft. high for reaching tops of many trees (particularly handy for spraying fruit trees)
-
A trigger control and adjustable tip allow varying the spray pattern from fan to stream
-
A 14-in. wand is standard equipment on the 15, 25, and 40 Gallon Sprayers
-
The black rubber hose will handle any spray material
|
 |
Pump
A diaphragm-type pump.
-
Designed for high-hour commercial applications
-
Can be run dry without damage
-
Santoprene diaphragm and Viton valves are not affected by fertilizer and other lawn care products
-
Pump filter located conveniently on the end of the pickup tube for easy cleaning
-
The pump automatic shut-off switch has been factory set, when the sprayers are assembled, at 90 PSI for best performance; Operating pressure varies with the spray tips used and handgun setting
A two-wire fused wiring harness complete with quick-disconnects provides convenient electrical hookup.
The large fill cap makes it easy to fill the tank.
All sprayers have a rocker-type, on-off electrical switch.
|
 |
Tank
A rugged translucent yellow tank has fill level indictors in gallons (molded up the back of the tank).
Protects and stabilizes tank when placed in a cart, Gator, or other vehicle for transporting |
 |
Frame
A heavy-duty frame rolls smoothly on 4.10/3.50x4 tires.
The rear of the frame is designed so the sprayer will stand upright during storage to reduce the amount of space required.
|
| Specification |
| |
15 Gallon Tow-Behind |
25 Gallon Tow-Behind |
25 Gallon Portable/
25 Gallon Tractor Trunk |
| Capacity |
15 U.S. gal. (57L) |
25 U.S. gal. (95L) |
25 U.S. gal. (95L) |
| Type |
Electric motor and
diaphragm |
Electric motor and
diaphragm |
Electric motor
and diaphragm |
| Manufacturer |
SHURflo |
SHURflo |
SHURflo |
| Operating pressure |
90 psi |
90 psi |
90 psi |
| Current draw |
7 amp |
7 amp |
7 amp |
| Valve material |
Viton |
Viton |
Viton |
| Diaphragm material |
Santoprene |
Santoprene |
Santoprene |
| Strainer |
Stainless-steel |
Stainless-steel |
Stainless-steel |
| Boom spray width |
60-in.
(152 cm) |
90-in.
(229 cm) |
90-in. (229 cm) (Tractor Trunk) |
| Spray tip(s) |
Two #11008VP |
Three #11008VP |
Three #11008VP
(Tractor Trunk) |
| Spray flow rate |
1.4 U.S. gal./min.
(5.3 L/m) |
1.4 U.S. gal./min.
(5.3 L/m) |
1.4 U.S. gal./min.
(5.3 L/m) (Tractor Trunk) |
| Remote spray method |
12-ft. hose with
adjustable polypropylene handgun with 14-in. wand |
15-ft. hose with adjustable polypropylene handgun with 14-in. wand |
15-ft. hose with adjustable polypropylene handgun with 14-in. wand |
| Handgun material |
Polypropylene with Viton components |
Polypropylene with Viton components |
Polypropylene with Viton components |
| Adjustment |
Fan-to-stream |
Fan-to-stream |
Fan-to-stream |
| Tires |
4.10/3.50x4, 2 PR
pneumatic |
4.10/3.50x4, 2 PR
pneumatic |
— |
| Wheel bearings |
Plastic bushings |
Plastic bushings |
— |
| Axle diameter |
0.625-in.
(1.6 cm) |
0.625-in.
(1.6 cm) |
— |
| Hitch |
Pin and spring clip |
Pin and spring clip |
— |
| Shipping weight |
43 lb. (19 kg) |
52 lb. (24 kg) |
31 lb. (14 kg) (Portable)
55 lb. (25 kg) (Tractor Trunk) |
| Net weight |
37 lb. (17 kg) |
44 lb. (20 kg) |
26 lb. (12 kg) (Portable)
50 lb. (23 kg) (Tractor Trunk) |
|
| 25 gal Sprayer |
| Part Number: |
LP19479 |
 |
| Price: |
Around $850.00 |
Click Here for Details and Information
25 gal. Tow-Behind Sprayer
Comes complete with a boom that sprays 60-in. wide. Also has an 12-ft. hose with an adjustable handgun for spot spraying lawns, shrubs, etc.
-
It is an excellent choice for spraying small- to moderate-size lawns and shrubs
-
Handgun with adjustable spray pattern is helpful when spraying fruit trees and can be used to spray trees up to 30-ft. high
-
A 14-in. wand on the handgun is standard equipment to give added convenience when spraying trees
 |
The 15 Gallon Tow-Behind Sprayer has two spray nozzles located on the boom. The 25 and 40 Gallon Trail-Type Sprayers have three spray nozzles located on the boom for broadcast spraying. The 40 Gallon 3-Point-Hitch-Mounted Sprayer has five nozzles. |
 |
On 25 and 40 Gallon Sprayers, the spray boom folds up against the tank for storage. |
 |
Screens in nozzles filter out foreign material.
-
Prevent spray tip from clogging
-
Check valve in spray tip prevents dripping and cross-siphoning of spray material when sprayer is shut off
-
Gives exact spray coverage
|
This liquid sprayer is especially suited for maintaining residential and small commercial properties.
-
Provide an excellent way to apply liquid fertilizer
-
Herbicides and pesticides can be applied along with liquid fertilizer or separately
Advantages of using liquid fertilizer over dry fertilizer.
-
More readily available to plants
-
Need not be worked into the soil by watering or rain before it will work
-
Herbicides are more effective when applied with liquid fertilizer.
 |
Stainless Steel Strainer
The stainless-steel strainer is installed on the end of the pickup hose and rests in the sump at the bottom of the tank. The large tank filler opening allows easy access to the suction hose for cleaning the 50-mesh strainer screen.
Also a unique sump (often not found on competitive units) is provided at the bottom of the tank below the pickup tube. It allows the tank to empty completely.
|
 |
Remote Spraying Jobs
All sprayers feature a handgun made of non-corrosive polypropylene material with Viton components for remote spray jobs.
-
Sprays up to 30-ft. high for reaching tops of many trees (particularly handy for spraying fruit trees)
-
A trigger control and adjustable tip allow varying the spray pattern from fan to stream
-
A 14-in. wand is standard equipment on the 15, 25, and 40 Gallon Sprayers
-
The black rubber hose will handle any spray material
|
 |
Pump
A diaphragm-type pump.
-
Designed for high-hour commercial applications
-
Can be run dry without damage
-
Santoprene diaphragm and Viton valves are not affected by fertilizer and other lawn care products
-
Pump filter located conveniently on the end of the pickup tube for easy cleaning
-
The pump automatic shut-off switch has been factory set, when the sprayers are assembled, at 90 PSI for best performance; Operating pressure varies with the spray tips used and handgun setting
A two-wire fused wiring harness complete with quick-disconnects provides convenient electrical hookup.
The large fill cap makes it easy to fill the tank.
All sprayers have a rocker-type, on-off electrical switch.
|
 |
Tank
A rugged translucent yellow tank has fill level indictors in gallons (molded up the back of the tank).
Protects and stabilizes tank when placed in a cart, Gator, or other vehicle for transporting |
 |
Frame
A heavy-duty frame rolls smoothly on 4.10/3.50x4 tires.
The rear of the frame is designed so the sprayer will stand upright during storage to reduce the amount of space required.
|
| Specification |
| |
15 Gallon Tow-Behind |
25 Gallon Tow-Behind |
25 Gallon Portable/
25 Gallon Tractor Trunk |
| Capacity |
15 U.S. gal. (57L) |
25 U.S. gal. (95L) |
25 U.S. gal. (95L) |
| Type |
Electric motor and
diaphragm |
Electric motor and
diaphragm |
Electric motor
and diaphragm |
| Manufacturer |
SHURflo |
SHURflo |
SHURflo |
| Operating pressure |
90 psi |
90 psi |
90 psi |
| Current draw |
7 amp |
7 amp |
7 amp |
| Valve material |
Viton |
Viton |
Viton |
| Diaphragm material |
Santoprene |
Santoprene |
Santoprene |
| Strainer |
Stainless-steel |
Stainless-steel |
Stainless-steel |
| Boom spray width |
60-in.
(152 cm) |
90-in.
(229 cm) |
90-in. (229 cm) (Tractor Trunk) |
| Spray tip(s) |
Two #11008VP |
Three #11008VP |
Three #11008VP
(Tractor Trunk) |
| Spray flow rate |
1.4 U.S. gal./min.
(5.3 L/m) |
1.4 U.S. gal./min.
(5.3 L/m) |
1.4 U.S. gal./min.
(5.3 L/m) (Tractor Trunk) |
| Remote spray method |
12-ft. hose with
adjustable polypropylene handgun with 14-in. wand |
15-ft. hose with adjustable polypropylene handgun with 14-in. wand |
15-ft. hose with adjustable polypropylene handgun with 14-in. wand |
| Handgun material |
Polypropylene with Viton components |
Polypropylene with Viton components |
Polypropylene with Viton components |
| Adjustment |
Fan-to-stream |
Fan-to-stream |
Fan-to-stream |
| Tires |
4.10/3.50x4, 2 PR
pneumatic |
4.10/3.50x4, 2 PR
pneumatic |
— |
| Wheel bearings |
Plastic bushings |
Plastic bushings |
— |
| Axle diameter |
0.625-in.
(1.6 cm) |
0.625-in.
(1.6 cm) |
— |
| Hitch |
Pin and spring clip |
Pin and spring clip |
— |
| Shipping weight |
43 lb. (19 kg) |
52 lb. (24 kg) |
31 lb. (14 kg) (Portable)
55 lb. (25 kg) (Tractor Trunk) |
| Net weight |
37 lb. (17 kg) |
44 lb. (20 kg) |
26 lb. (12 kg) (Portable)
50 lb. (23 kg) (Tractor Trunk) |
|
|
|