Hunter & McPherson
 
Disclaimer
       
 

Specifications for the John Deere X500 Series

John Deere Gators
MANUFACTURER John Deere
MODEL Gator 850D XUV 4x4 Diesel
Engine and Electrical  
    Make Yanmar 3TNV70
    Type 4-cycle diesel
    Cylinders
3
    Valving OHV
    Horsepower* 24.6 (18.3 kw)*
    Displacement 854 cc
    Maximum torque, ft.-lb. (Nm) 36.9 (50) @ 2400 rpm
    Iginition type Compression ignition
    Lubrication Full pressure
    Oil filter Screw on filter
    RPM, idle (no load) 1050 +/- 25
    RPM, fast (no load) 3700 +/- 25
    Cooling system Liquid
    Air cleaner Dry, replaceable single element with remote intake
    Muffler ---
    Battery 480CCA
    Alternator 40 amp @ 3200 rpm regulated, 540 watts
    Headlights Two 37.5 watt halogen
Fuel System  
    Capacity, U.S. gal. (L) 5.3 (20.1)
    Consumption (half load at avg. speed), U.S. gal./hr. (L/h) 0.5 (1.89)
    Fuel pump type Electric
4WD  
    System Type On-demand true four-wheel drive system
    Front Differential (Engagement) Auto-locking (On/off rocker switch)
    Rear Differential (Engagement) Positive locking, mechanically actuated (hand-operated)
Transmission  
    Type Continuously Variable Transmission (CVT)
    Drive belt Spun top cog, 31 mm wide
    Ground speed, mph (km/h) 0-30 (0-48) Hi Forward, 0-15 (0-24) Lo Forward, 0-17 (0-27) Reverse
    Transaxle Two speed, oil bath
    Gear Selection Forward (hi-lo), Netural, Reverse
    Overall Reduction Ratio: ---
        Low 86.8488:1
        High 86.8488:1
        Reverse 75.9333:1
    Brakes Front/rear hydraulic disk
    Park brake Driveline mechanical disk, hand operated
    Bearings Sealed, double-row ball
    Axle 27 mm dia., forged CV-shaft with Double Offset Joint
Suspension and Steering  
    Suspension, front Independent with McPherson Strut
    Front Susp. Travel (total), in. (mm) 5.15 (131)
    Suspension, rear Independent with coil over shock
    Rear Susp. Travel (total), in. (mm) 7 (170 mm)
    Steering Rack and Pinion
    Turning radius, ft. (m) 12.4 (3.8)
Hitch  
    Front Optional 2-in receiver
    Rear Standard 2-in receiver
Occupant Protective System (OPS)  
    Tubular overhead structure 1.75 in (44.4 mm) steel tube
    Passenger grab handles Front OPS post, front dash and on both sides of seat
    Seat belts 3-point
    Certification SAE J2194 and OSHA ROPS standard
Ground Pressure (max):  
    With 200-lb. Operator Only, psi (kg/cm2) 14 (0.98)
    Fully Loaded Vehicle, psi (kg/cm2) 14 (0.98)
Ground Clearance  
    Ground Clearance, in. (mm) 11 (267)
    Under Foot Platform, in. (mm) 12.25 (311)
Dimensions  
    Length (w/out bumper), in. (mm) 108 (2743)
    Length (with bumper), in. (mm) 113 (2870)
    Width, in. (mm) 59.3 (1506)
    Front-tread Centers, in. (mm) 44.8 (1137)
    Rear-tread Centers, in. (mm) 47.9 (1216)
    Height (overall with OPS), in. (mm) 74.375 (1889)
    Wheelbase, in. (mm) 79.0 (2007)
    Weight (incl. fuel/fluids), lb. (kg) 1532 (695)
    Seating Capacity
2
    Seat Type Professional high back bucket, tilt forward
    Towing Capacity, lb. (kg) 1300 (590)
    Payload Capacity, lb. (kg) 1400 (635)
    Sound rating (at operator's ear), dB(A)
91.1
Cargo Box  
    Material Steel
    Capacity ---
        Dimensions, in. (mm) 43.9L x 49W x 9D (1116L x 1244W x 229D)
        Volume, cu. ft. (m3) 11.2 (0.32)
        Weight, lb. (kg) 1000 (454)
        Dump Manual (factory installed power lift option)
        Tailgate Hinged at bottom, removable
Tires  
    Front 25x10-12 (AT489), 25x9-12 (All Trail II)
    Rear ---
        Turf & AT489 25x11-12 (AT489 only)
        All Trail II 25x11-12
    Available Tread Types Standard (All Trail II), Aggressive (AT489)
 
       
       
 
459 Maroondah Hwy Lilydale, Vic, Australia 3140
 
 
Ph: (03) 97350166 | Fax: (03) 97353214